We compare published specs and prices. When you buy through our links, we may earn a commission. How we research
PERGOLA VS GAZEBO

Home / Guides / Sizes and cost

How much does a pergola kit cost?

The same 10 by 12 footprint can cost three hundred dollars or five thousand. Material, roof type and timber size explain almost all of the gap.

Updated November 20, 2026 · Specs compared from published manuals, not tested in person

Black freestanding pergola on a concrete terrace by the sea

Short answer. In November 2026, a pergola kit from 10x10 to 12x16 feet cost about $250 to $640 in light metal with a fabric canopy, about $1,100 to $2,100 in mass-market cedar or vinyl, about $950 to $3,500 with a louvered roof, and about $3,700 to $5,100 in heavy made-to-order cedar. Assembly, footings and permits come on top.

Key facts

  • In November 2026, mass-market cedar pergola kits of about 10 by 12 feet were listed at about $1,200 to $1,540 at US sellers, kit only.
  • Light aluminum or steel pergola kits with a fabric canopy of about 10 by 10 feet were listed at about $250 to $370 in November 2026.
  • Louvered pergola kits were listed at about $950 to $2,200 for about 10 by 10 feet and about $2,400 to $3,500 for about 12 by 16 feet in November 2026.
  • Heavy-timber cedar pergola kits made to order were listed at about $3,700 to $5,100 for sizes from 10 by 10 to 12 by 16 feet in November 2026.
  • Sellers that offer assembly with a pergola kit were charging about $850 to $1,200 more than the kit-only price for 10 by 10 to 12 by 16 foot kits in November 2026.

How much does a pergola kit cost by material and size?

The table gives kit-only prices seen at US sellers. Sizes are nominal and grouped with their near neighbors, so "about 12 × 16" includes kits sold as 16 × 12 or 14 × 12.

Typical prices

Material and roofAbout 10 × 10 ftAbout 10 × 12 ftAbout 12 × 12 ftAbout 12 × 16 ft
Light steel with fabric canopyAbout $290 to $370About $420 to $640Few listings seenAbout $1,150 to $1,200 (heavier steel, 14 ft wide)
Light aluminum with fabric canopyAbout $250 to $360About $270 to $430Few listings seenAbout $430 to $640
Wood, mass-market cedarAbout $1,100About $1,200 to $1,540About $1,400 to $2,080About $1,600 to $1,700
VinylAbout $1,260 to $1,520Few listings seenAbout $1,260 to $1,470About $1,570
Louvered, aluminum or steelAbout $950 to $2,200About $1,850 to $2,700About $2,750 to $2,900About $2,400 to $3,500
Wood, heavy cedar made to orderAbout $3,700About $3,900About $3,950About $5,100

Prices seen in November 2026 at: Backyard Discovery, Yardistry, Vita, Sunjoy, Purple Leaf, Domi Outdoor Living, Homestead Supplier, Pergola Depot, Pergola Kits USA. Prices change often and sales are frequent: check the current price before you decide.

Made-to-order sellers sit above the table. Their cedar and pine kits start at about $4,100 to $6,000 before size options, and premium vinyl starts at about $4,900. Custom-built motorized louvered systems start at about $17,500.

Why does the same size cost so different?

Because "10 by 12" says nothing about what holds the roof up. Compare these on the spec sheet before you compare prices:

  • Post and beam section. A kit with posts close to 6 inches square uses several times the wood or metal of a thin-post kit.
  • Wall thickness. On aluminum and steel, thin walls are what make the low prices possible. Shipping weight is a quick check.
  • Roof. Open rafters cost least. A canopy adds a little, and louvers add a lot. See louvered pergola kits.
  • Wood species and grade. Cedar costs more than pine. Our materials guide covers what each one asks in upkeep.
  • Made to order or mass-produced. Kits cut to your size in a US shop cost more than boxed imports.
  • Shipping. Some prices include delivery. Heavy timber kits often add freight.

What does each material cost?

Wood

Mass-market cedar kits are the value point for a solid frame: a little over $1,000 for a 10x10 and under $2,100 for a 12x12. Heavy-timber cedar kits made to order cost about three times as much for the same footprint. A bracket kit with your own lumber is a third route, where the total depends on local wood prices.

Aluminum

Aluminum covers the widest range. Thin frames with a sliding fabric canopy were the cheapest pergolas seen. Thick-walled aluminum with louvers was among the most expensive. See pergolas with a retractable canopy for the low end.

Steel

Light steel frames with a fabric top start at a few hundred dollars. Heavier galvanized steel pergolas with a shade sail were listed at a little over $1,100 for sizes around 14 feet wide. Louvered steel kits sit with the louvered row.

Vinyl

Mass-market vinyl kits were listed between about $1,260 and $1,570 from 10x10 to 12x16. Made-to-order vinyl over structural inserts starts near $4,900.

Louvered

The roof costs more than the frame. Size matters less than build: a 10x10 ranged from about $950 to $2,200 depending on the maker and the metal.

What does installation add?

Where a seller offers assembly with the kit, the price difference was about $850 to $1,200 for common sizes.

KitKit onlyWith seller assembly
Cedar, 10 × 10 ftAbout $1,100About $1,970
Cedar, 10 × 12 ftAbout $1,200 to $1,540About $2,070 to $2,420
Cedar, 12 × 12 ftAbout $1,400 to $2,080About $2,450 to $2,990
Steel louvered, 10 × 10 ftAbout $1,900About $2,750

Those figures come from two sellers. Check what the service covers, since it normally assumes a finished, level base. A local contractor or handyman quotes by the job, and the quote moves with access, height and how many people the lift needs. Get two or three written quotes.

What else should you budget for?

The kit price leaves out the base, the paperwork and the finish. These vary too much by site to give one figure.

  • Footings or slab. On bare ground, each post needs a concrete footing sized and set to the depth your building department requires. Doing it yourself costs bags of concrete, forms and a day of digging. A contractor charges by the footing or by the job.
  • Anchors. Often not in the box. See how to anchor a gazebo or pergola.
  • Permit. Where one is required, there is a fee, and sometimes drawings or an engineer's letter to pay for. Ask the building department before you order.
  • Electrical. Lights, a fan or a louver motor on a hardwired circuit mean a licensed electrician.
  • Finish and upkeep. Stain or sealer for wood, now and every few years.
  • Canopy replacement. Fabric tops are a repeat cost.

How to compare two prices

  1. Check that both are the same roof size and post footprint.
  2. Compare post section, wall thickness and shipping weight.
  3. Check what is included: delivery, anchors, canopy, assembly.
  4. Read the wind and snow figures, if any, and the warranty.
  5. Add the base, the permit and the labor to both.

We compare published specs and prices only. Confirm the current price and the spec sheet of the exact model before you decide.

Models and prices seen

These are the individual listings behind the ranges above, cheapest first. We have not tested them: the list shows what sellers were asking, not which one is best.

Model as listedSellerListed price
Aluminum pergola with retractable canopy 10x10Domi Outdoor Living$249.99Check price
Aluminum pergola with retractable canopy 10x13Domi Outdoor Living$269.99Check price
Steel pergola with adjustable canopy 9x9Sunjoy$289.20Check price
Aluminum pergola with retractable canopy 10x10, wood grain framePurple Leaf$357Check price
Metal pergola with sling canopy 10x10Sunjoy$367.80Check price
Steel retractable pergola 9x12Sunjoy$420Check price
Aluminum pergola with retractable canopy 11x16Domi Outdoor Living$429.99Check price
Aluminum pergola with retractable canopy 10x13, wood grain frame (highest variant)Purple Leaf$430Check price
Steel pergola with adjustable canopy and privacy wall 10x12Sunjoy$637.44Check price
Aluminum pergola with retractable canopy 12x16 (highest variant)Purple Leaf$640Check price
Louvered pergola 10x10, lowest seenDomi Outdoor Living$949.99Check price
Cedar pergola 10x10, shipping includedBackyard Discovery$1,099Check price
Galvanized steel pergola with sail shade 14x10, shipping includedBackyard Discovery$1,149Check price
Cedar pergola 12x10, shipping includedBackyard Discovery$1,199Check price
Cedar pergola 12x10, 5.75 in postsBackyard Discovery$1,199Check price
Galvanized steel pergola with sail shade 14x12, shipping includedBackyard Discovery$1,199Check price
Vinyl pergola 10x10Vita$1,259.99Check price
Vinyl pergola 12x12Vita$1,259.99Check price
Cedar pergola 12x12, shipping includedBackyard Discovery$1,399Check price
Vinyl canopy pergola 12x12Vita$1,469.99Check price
Vinyl pergola 10x10 with tall base moldings and canvas weaveVita$1,519.99Check price
Cedar pergola 10x12Yardistry$1,538.99Check price
Vinyl pergola 12x16Vita$1,569.99Check price
Cedar pergola 14x12, shipping includedBackyard Discovery$1,599Check price

Listed prices read on each seller's own page on November 20, 2026. Many were sale prices, and "from" prices often leave out accessories, delivery or assembly. Prices change often: open the seller's page for the current one.

See all 49 listings in this category

Common questions

How much does a pergola kit cost?

In November 2026, light metal kits with a fabric canopy started at about $250, mass-market cedar and vinyl kits ran about $1,100 to $2,100, and louvered kits about $950 to $3,500, for sizes from 10 by 10 to 12 by 16 feet.

What is the cheapest pergola material?

Thin steel or aluminum with a fabric canopy is the cheapest to buy. Among solid frames without fabric, mass-market cedar and vinyl kits were the lowest priced, starting a little above $1,000 for 10 by 10 feet.

How much does a 10x10 pergola kit cost?

In November 2026, a 10 by 10 kit was listed at about $250 to $370 in light metal with a canopy, about $1,100 in mass-market cedar, about $1,260 to $1,520 in vinyl and about $950 to $2,200 with a louvered roof.

How much does it cost to have a pergola kit installed?

Sellers that offer assembly were charging about $850 to $1,200 on top of the kit for common sizes in November 2026. A local contractor quotes by the job, and footings, electrical work and permits are separate.

Why do pergola prices vary so much?

Timber size, metal thickness, roof type and where the kit is made. A louvered roof, 6 inch posts or made-to-order cedar can multiply the price of a frame with the same footprint.

Use the 30 second finder →

Keep reading

All 19 guides